E40通規7006-27-7  檢測方法

目的： 檢驗成品燈上E40燈頭螺紋*大尺寸和尺寸T1*小值。

檢測方法： 當成品燈上的燈頭完全旋入量規內時，燈頭中心觸點應與X面共面或凸出X面。

“GO” GAUGE FOR CAPS ON FINISHED LAMPS-E40

Purpose : To check the maximum dimensions of the screw thread and dimension T1 minimum of E40 caps on finished lamps.

Testing :When the cap on a finished lamp has been screwed into the gauge as far as it will go,the centre contact shall be co-planar with , or project beyond , surface X .



E40燈頭止規7006-28D-1使用方法說明

E40 止規7006-28D-1

目       的：檢驗成品燈上E40燈頭螺紋*小外徑(尺寸d)。

使用方法：a)  把量規套在成品燈（燈頭向上）的燈頭螺紋上時，燈頭中心觸點不應凸出X面。

b) 檢驗僅利用量規自身重量進行。

 "NOT GO" GAUGE FOR CAPS ON FINISHED LAMPS

Purpose : To check the minimum outside (major) diameter of the screw thread , dimension d,of E40 caps on finished lamps.

Testing : When the gauge is placed over the thread of the cap on a finished lamp,held cap uppermost,
the centre contact shall not project beyond surface X.
Only the weight of the gauge itself shall be used in the test . 

E40接觸性能量規7006-52-1使用說明

E40接觸性能規7006-52-1

目       的：用來檢測燈與IEC標準燈座的接觸性能

使用方法：將被測試燈推入量規，能直至W面接觸到V面或者超過V面，則表示接觸性能良好。否則不符合要求。

GAUGE  FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING CONTACT MAKING

Purpose : To check lamp dimensions for contact making in I.E.C. holders

TESTING: The shape of the lamp with regard to the fit in the lampholder is assumed be correct , if the lamp can be pushed into the gauge till plane W reaches plane V or projects beyond it.

E40防意外接觸性能量規7006-53-1使用說明

E40防意外接觸性能規7006-53-1

目       的：用來檢測燈防止意外接觸保護

使用方法：當燈完全插入量規內時，如果W面沒有凸出V面，則可認為燈的形狀對于防意外接觸性能是合格的。

Purpose : To check protection against accidental contact.

TESTING: The shape of the lamp with regard to protection against accidental contact is assumed to be correct if the test sample being pushed as far as possible into the gauge, plane W does not protrude beyond plane V.


生產廠家：深圳市博納德精密儀器有限公司專業生產GB、IEC、UL、BS等標準的試驗指棒銷、彈簧沖擊錘、球壓、爬電距離測試卡、插頭插座量規、燈頭燈座量規等產品，代理德國PTL，德國GMG，德國FEMTO，英國RS，英國MUNRO，美國MONROE，以色列OPHIR等品牌的產品。

按功能分類：

E系列：E5燈頭量規，E10燈頭量規，E11燈頭量規，E12燈頭量規，E14燈頭量規，E17燈頭量規，E26燈頭量規，E26d燈頭量規，E27燈頭量規，E39燈頭量規，E40燈頭量規等.

 B系列：B15d燈頭量規，B22d燈頭量規,BA9燈頭量規等；

 G系列：G4燈頭量規.G5燈頭量規,G9燈頭量規,G13燈頭量規,Gu10燈頭量規,GU5.3燈頭量規,GX53燈頭量規，GY6.35燈頭量規，GZ10燈頭量規，GU4燈頭量規等。